Dear Alex,
Babettli and I have gone through the offer and it looks good, with the
following changes/confirmations before we can accept:
General, Confirming our Verbal Conversations:
1) We discussed in our visit Saturday child lock mechanisms which
would ensure the windows 'turn'-opened no more than a certain angle.
We understood those were included in your quote for all windows, can
you please confirm?
2) You didn't have the code number for the handle and hardware colour
we liked, can we confirm "F1 silver" is the one in the attached image?
3) You showed us the partial handle 45' tilt ventilation mode. Can we
confirm that all windows will have that and *will not* have any form
of trickle vents installed?
4) Babettli had discussed with you that the final sizes taken for the
large rear 3m wide sliding door and fixed panel above it should only
be taken after the steel frame had been erected. I understand from
Babettli that you said this could be worked into the order 'later' in
the process. Can you confirm how much time you'll need from when the
steel frame is completed til you'll be able to provide those windows?
I.e. how soon do we have to ensure the steel frame is completed in
order for you to be able to deliver all at once in your 7-8weeks?
5) As discussed, in all cases where there is a fixed panel window, we
do not wish it to have 'frame on top', but rather the more minimal
wood frame.
In our review of the Technical Specification List:
6) Pos. no 2, W3, W4 contains no Glazing Specification. For the sake
of completeness, it should be the same as Pos. no 1, W1, W2 which is
ESG4T/18/4/18/ESG4T.
7) Pos. no 7 W19 is currently shown as handle on the right as seen
from inside, but on examining the bathroom and a nearby radiator, we
think it will need to have handle on the left.
8) Pos. no 8 'Balcony door in kitchen' is currently listed as triple
glazed, toughened glass both sides. It and its fixed panel should be
only ECO68 double glazed, toughened both sides. As well, the door
should be larger, and the fixed panel smaller. The door width should
be 900mm and the fixed panel 500mm.
9) Pos. no 9 'HS sliding door' is currently listed as triple glazed,
toughened glass both sides. This is a south-facing window in a living
space. I don't recall -- was there a reason it needed to be Aluron
Triple? It should only be ECO68 double glazed, toughened both sides.
As well, it is currently listed as 3000 x 2300. Please make it 3000 x
2400.
10) Pos. no 10, FP02, FP03. These are on the ground floor facing into
our backyard which is not secured. Can you please specify that these
are also toughened glass both sides.
11) Pos. no 11, W6 As above, this is on the ground floor facing into
our backyard which is not secured. Can you please specify that this
is also toughened glass both sides. Can we please switch the opening
direction so that it is handle on the right as seen from the inside.
12) Pos. no 12, W9, W17. Please change the handle from current left
as viewed from inside to right as viewed from inside. Also, these
are bedroom spaces. Can we please change them to Passiv Aluron triple
glazed.
13) Pos. no 13, W15. This is a bedroom space. Can we please change
it to Passiv Aluron triple glazed.
14) Pos. no 14, W18. This is a potential bedroom space. Can we
please change it to Passiv Aluron triple glazed.
15) Pos. no 16, W05. This on the ground floor facing into our
backyard which is not secured. Can you please specify that this is
also toughened glass both sides.
In summary,
I think this means we've asked for the very large sliding window and
kitchen balcony door to be ECO68 double toughened instead of Aluron
triple, and instead asked for 4 smaller windows to be Aluron triple
instead of ECO68 double. As well, we've asked for 4 more windows on
the ground floor rear to be toughened on both sides. Would you like
to recompute the price for us?
Regards,
Michael and Babettli
On Wed, Jun 27, 2012 at 9:45 PM, Babettli Azzone
<Babettli@vellutodesign.com> wrote:
>
>
>
>
> From: alex@adpol.nazwa.pl [mailto:alex@adpol-gb.co.uk]
> Sent: 27 June 2012 12:47
> To: Babettli Azzone; stan@adpol-gb.co.uk; office@adpol-gb.co.uk
> Subject: RE: FW: ADPOL offer
>
>
>
> Dear Babettli,
>
> I am sending you contract and invoice, please find as attached.
[...]